Instructions

Chapter 4 Functions of the Front Panel of EMI RIGOL
RSA3000E User Guide 4-35
Meter->List
Adds the currently set meter frequency to the signal table.
Marker Func
Selected Marker
Selects a marker for measurement. The available markers include Marker 1 through
Marker 8.
Detectors
1. Select Detector
Sets the detector for marker measurement. The available detectors include
Detector 1, Detector 2, and Detector 3.
2. Dwell Time
Sets the dwell time of the selected detector.
3. Detector
Sets the type of the detector for marker measurement. The available detector
types include Pos Peak, Quasi Peak, CISPR Average, RMS Average, Average, and
Neg Peak. You can also turn off the detector.
4. Limit for Delta
Sets the limit line of the current detector measurement to obtain the limit delta
in the marker measurement list. The available limits include Limit 1 through
Limit 6.
Meas at Mkr Win
Enables or disables the marker measurement window display. When this function is
enabled, the marker measurement window is displayed in the upper left corner of the
user interface. The final measurement results of the current marker will be displayed
in the window.