Instructions

Chapter 1 Quick Start RIGOL
RSA3000E User Guide 1-37
Mode Setting
Mode
RSA provides four working modes: GPSA, RTSA, VSA (option RSA3000E-ASK/FSK),
and EMI (option RSA3000E-EMI). Press Mode to select the working mode.
Note: In different working modes, the functions of the keys on the front panel may
be different. Press Help to display the help information of the current working mode.
If you need help information for other modes, exit the help interface first. Then
select the desired working mode and obtain the corresponding help information.
1. GPSA
GPSA adopts two analysis methods: swept and FFT. GPSA can not only carry out
frequency domain analysis, but also time domain (zero span) analysis.
Select GPSA. In this working mode, press Meas to select multiple
measurements. For details, refer to Chapter 2.
2. RTSA
RTSA provides the analysis function for the real-time signal, which can capture
the complex signal seamlessly.
Select RTSA. In this working mode, you can also press Meas to select multiple
measurements. For details, refer to Chapter 3.
3. VSA
VSA mode provides the standard vector signal analysis measurement function. If
you need this function, please purchase this option (order No.
RSA3000E-ASK/FSK), and install it according to instructions in "Install the
Option".
4. EMI
EMI mode provides the EMI pre-compatibility measurement function. If you
need this function, please purchase this option (order No. RSA3000E-EMI), and
install it according to instructions in "Install the Option".
Note: After purchasing the RSA3000E-EMI option, you do not need to purchase the
EMC filter and quasi-peak detector kit RSA3000E-EMC, as the RSA3000E-EMI option
contains all the functions of RSA3000E-EMC.