Instructions

RIGOL Chapter 2 Command Systems for GPSA and RTSA Modes
2-164 RSA3000E Programming Guide
Remarks
This command is only available for RTSA mode and valid when the SSC function is enabled.
Return Format
The query returns 0 or 1.
Example
The following command enables Marker 1.
:SENSe:SIGCapture:2FSK:MARK1:SWitch:STATe ON or :SENSe:SIGCapture:2FSK:MARK1:SWitch:STATe 1
The following query returns 1.
:SENSe:SIGCapture:2FSK:MARK1:SWitch:STATe?
[:SENSe]:SIGCapture:2FSK:MARK2:FREQ
Syntax
[:SENSe]:SIGCapture:2FSK:MARK2:FREQ <freq>
[:SENSe]:SIGCapture:2FSK:MARK2:FREQ?
Description
Sets the frequency value at Marker 2.
Queries the frequency value at Marker 2.
Parameter
Name
Type
Range
Default
<freq> Consecutive Real Number (start frequency) to (stop frequency)
Stop
Frequency
Remarks
This command is only available for RTSA mode and valid when the SSC function is enabled.
Return Format
The query returns the frequency value of Marker 2 in integer. The unit is Hz.
Example
The following command sets the frequency value at Marker 2 to 1 MHz.
:SENSe:SIGCapture:2FSK:MARK2:FREQ 1000000
The following query returns 1000000.
:SENSe:SIGCapture:2FSK:MARK2:FREQ?
[:SENSe]:SIGCapture:2FSK:MARK2:SWitch[:STATe]
Syntax
[:SENSe]:SIGCapture:2FSK:MARK2:SWitch[:STATe] OFF|ON|0|1
[:SENSe]:SIGCapture:2FSK:MARK2:SWitch[:STATe]?
Description
Enables or disables Mark 2.
Queries the on/off status of Marker 2.