Instructions

Chapter 2 Command Systems for GPSA and RTSA Modes RIGOL
RSA3000E Programming Guide 2-175
Example
The following command sets the start line to 5 ms.
:SENSe:TPOWer:LLIMit 0.005
The following query returns 5.000000000e-03.
:SENSe:TPOWer:LLIMit?
[:SENSe]:TPOWer:MODE
Syntax
[:SENSe]:TPOWer:MODE AVERage|PEAK|RMS
[:SENSe]:TPOWer:MODE?
Description
Sets the power type for the T-power measurement.
Queries the power type for the T-power measurement.
Parameter
Name
Type
Range
Default
——
Keyword
AVERage|PEAK|RMS
PEAK
Remarks
AVERage: indicates average power.
PEAK: indicates peak power.
RMS: indicates the RMS power.
This command is only valid when the T-power measurement in GPSA mode is enabled.
Return Format
The query returns AVER, PEAK, or RMS.
Example
The following command sets the power type to Average.
:SENSe:TPOWer:MODE AVERage
The following query returns AVER.
:SENSe:TPOWer:MODE?
[:SENSe]:TPOWer:RLIMit
Syntax
[:SENSe]:TPOWer:RLIMit <time>
[:SENSe]:TPOWer:RLIMit?
Description
Sets the stop line for the T-power measurement.
Queries the stop line for the T-power measurement.
Parameter
Name
Type
Range
Default
<time> Consecutive Real Number
current value of start line to
current value of sweep time
1 ms