Instructions

Chapter 3 Command System for EMI Mode RIGOL
RSA3000E Programming Guide 3-47
:INITiate Commands
Command List:
 :INITiate:FSCan:CLEar:IMMediate
 :INITiate:PAUSe
 :INITiate:RESume
 :INITiate1:CONTinuous
 :INITiate2:CONTinuous
 :INITiate2:IMMediate
 :INITiate2:RESTart
:INITiate:FSCan:CLEar:IMMediate
Syntax
:INITiate:FSCan:CLEar:IMMediate
Description
Deletes all the signals in the signal table and launches the selected scan sequence.
:INITiate:PAUSe
Syntax
:INITiate:PAUSe
Description
Pauses scan, search, or the final measurement.
:INITiate:RESume
Syntax
:INITiate:RESume
Description
Resumes to scan from the scan point where you pause.
:INITiate1:CONTinuous
Syntax
:INITiate1:CONTinuous OFF|ON|0|1
:INITiate1:CONTinuous?
Description
Sets the measurement mode of the meter to Continuous (ON|1) or Single (OFF|0).
Queries the measurement mode of the meter.