Instructions

Chapter 3 Command System for EMI Mode RIGOL
RSA3000E Programming Guide 3-73
[:SENSe]:FSCan:DETector:TRACe<n>
Syntax
[:SENSe]:FSCan:DETector:TRACe<n> AVERage|NEGative|POSitive|CAVerage |QPEak|RAVerage
[:SENSe]:FSCan:DETector:TRACe<n>?
Description
Sets the detector type for the specified trace.
Queries the detector type for the specified trace.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3
1
-- Keyword
AVERage|NEGative|POSitive|
CAVerage|QPEak|RAVerage
POSitive
Remarks
AVERage: indicates the voltage average.
NEGative: indicates the negative peak.
POSitive: indicates the positive peak.
CAVerage: indicates the CISPR average.
QPEak: indicates the quasi-peak.
RAVerage: indicates the RMS average.
Return Format
The query returns AVER, NEG, POS, CAV, QPE, or RAV.
Example
The following command sets the detector type of Trace 1 to Positive.
:SENSe:FSCan:DETector:TRACe1 POSitive
The following query returns POS.
:SENSe:FSCan:DETector:TRACe1?
[:SENSe]:FSCan:FINal:DETector<n>
Syntax
[:SENSe]:FSCan:FINal:DETector<n> POSitive|QPEak|CAVerage|RAVerage|AVERage|NEGative|OFF
[:SENSe]:FSCan:FINal:DETector<n>?
Description
Sets the detector type of the specified detector in the final measurement.
Queries the detector type of the specified detector in the final measurement.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3
1
-- Keyword
POSitive|QPEak|CAVerage|
RAVerage|AVERage|NEGative|OFF
Refer to "Remarks"
Remarks
POSitive: indicates the positive peak.
QPEak: indicates the quasi-peak.
CAVerage: indicates the CISPR average.