Instructions

Chapter 4 Command System for VSA Mode RIGOL
RSA3000E Programming Guide 4-65
:TRIGger[:SEQuence]:FMT:MASK
Syntax
:TRIGger[:SEQuence]:FMT:MASK UPPer|LOWer|BOTH
:TRIGger[:SEQuence]:FMT:MASK?
Description
Sets the mask to be used for the current trigger.
Queries the mask to be used for the current trigger.
Parameter
Name
Type
Range
Default
——
Keyword
UPPer|LOWer|BOTH
UPPer
Remarks
This command is only valid when you select FMT to be the trigger source.
Return Format
The query returns UPP, LOW, or BOTH.
Example
The following command sets the mask to be used for the current trigger to Upper.
:TRIGger:SEQuence:FMT:MASK UPPer
The following query returns UPP.
:TRIGger:SEQuence:FMT:MASK?
:TRIGger[:SEQuence]:FMT:MASK:EDIT
Syntax
:TRIGger[:SEQuence]:FMT:MASK:EDIT UPPer|LOWer
:TRIGger[:SEQuence]:FMT:MASK:EDIT?
Description
Sets the mask type that is currently viewed/edited.
Queries the mask type that is currently viewed/edited.
Parameter
Name
Type
Range
Default
——
Keyword
UPPer|LOWer
UPPer
Remarks
This command is only valid when you select FMT to be the trigger source.
Return Format
The query returns UPP or LOW.
Example
The following command sets the mask that is currently viewed/edited to Upper.
:TRIGger:SEQuence:FMT:MASK:EDIT UPPer
The following query returns UPP.
:TRIGger:SEQuence:FMT:MASK:EDIT?