Instructions

Table Of Contents
Chapter 2 Command System RIGOL
RSA5000 Programming Guide 2-115
Example
The following command sets the bandwidth of the adjacent channel to 1 MHz.
:SENSe:ACPower:BANDwidth:ACHannel 1000000
The following query returns 1.000000000e+06.
:SENSe:ACPower:BANDwidth:ACHannel?
[:SENSe]:ACPower:BANDwidth:INTegration
Syntax
[:SENSe]:ACPower:BANDwidth:INTegration <freq>
[:SENSe]:ACPower:BANDwidth:INTegration?
Description
Sets the bandwidth of the main channel.
Queries the bandwidth of the main channel.
Parameter
Name
Type
Range
Default
<freq>
Consecutive Real Number
3 Hz to 2.166666 GHz
2 MHz
Remarks
This command is only valid when the adjacent channel power measurement in GPSA mode is enabled.
Return Format
The query returns the bandwidth of the main channel in scientific notation. Its unit is Hz.
Example
The following command sets the bandwidth of the main channel to 1 MHz.
:SENSe:ACPower:BANDwidth:INTegration 1000000
The following query returns 1.000000000e+06.
:SENSe:ACPower:BANDwidth:INTegration?
[:SENSe]:ACPower:CSPacing
Syntax
[:SENSe]:ACPower:CSPacing <freq>
[:SENSe]:ACPower:CSPacing?
Description
Sets the center frequency difference (channel spacing) between the main channel and the adjacent
channels.
Queries the channel spacing.
Parameter
Name
Type
Range
Default
<freq>
Consecutive Real Number
3 Hz to 2.166666 GHz
2 MHz
Remarks
This command is only valid when the adjacent channel power measurement in GPSA mode is enabled.