Instructions

RIGOL Chapter 2 Command System
2-120 RSA5000 Programming Guide
[:SENSe]:AVERage:TYPE:AUTO
Syntax
[:SENSe]:AVERage:TYPE:AUTO OFF|ON|0|1
[:SENSe]:AVERage:TYPE:AUTO?
Description
Enables or disables the auto state for the average type of the swept SA analysis measurement.
Queries the on/off auto state for the average type of the swept SA analysis measurement.
Parameter
Name
Type
Range
Default
——
Bool
OFF|ON|0|1
OFF|0
Remarks
This command is only available for GPSA mode.
Return Format
The query returns 0 or 1.
Example
The following command enables the auto state for the average type of the swept SA analysis mode.
:SENSe:AVERage:TYPE:AUTO ON or :SENSe:AVERage:TYPE:AUTO 1
The following query returns 1.
:SENSe:AVERage:TYPE:AUTO?
[:SENSe]:BANDwidth|BWIDth:EMIFilter:STATe
Syntax
[:SENSe]:BANDwidth|BWIDth:EMIFilter:STATe OFF|ON|0|1
[:SENSe]:BANDwidth|BWIDth:EMIFilter:STATe?
Description
Enables or disables the EMI filter.
Queries the status of the EMI filter.
Parameter
Name
Type
Range
Default
——
Bool
OFF|ON|0|1
OFF|0
Remarks
ON: selects the EMI filter (-6 dB bandwidth).
OFF: selects the Gaussian filter (-3 dB bandwidth).
This command is only available for GPSA mode.
Return Format
The query returns 0 or 1.
Example
The following command selects the EMI filter.
:SENSe:BANDwidth:EMIFilter:STATe ON or :SENSe:BANDwidth:EMIFilter:STATe 1
:SENSe:BWIDth:EMIFilter:STATe ON or :SENSe:BWIDth:EMIFilter:STATe 1