Instructions

Table Of Contents
Chapter 1 Programming Overview RIGOL
RSA5000 Programming Guide 1-3
Remote Control Method
1. User-defined programming
You can refer to the SCPI (Standard Commands for Programmable Instruments) commands listed in
Chapter 2 in this manual to control RSA5000 by programming in LabVIEW, Visual C++, and other
development environments. For details, refer to descriptions in Chapter 4 in this manual.
2. Send SCPI commands via the PC software
You can use the PC software to send commands to control RSA5000 remotely. RIGOL Ultra Sigma is
recommended. You can download the software from RIGOL official website (www.rigol.com).