Instructions

Chapter 2 Command System RIGOL
RSA5000 Programming Guide 2-211
:TRIGger[:SEQuence]:HOLDoff:STATe
Syntax
:TRIGger[:SEQuence]:HOLDoff:STATe OFF|ON|0|1
:TRIGger[:SEQuence]:HOLDoff:STATe?
Description
Enables or disables the trigger holdoff function.
Queries the status of the trigger holdoff function.
Parameter
Name
Type
Range
Default
——
Bool
OFF|ON|0|1
OFF|0
Return Format
The query returns 1 or 0.
Example
The following command enables the trigger holdoff function.
:TRIGger:SEQuence:HOLDoff:STATe ON or :TRIGger:SEQuence:HOLDoff:STATe 1
The following query returns 1.
:TRIGger:SEQuence:HOLDoff:STATe?
:TRIGger[:SEQuence]:SOURce
Syntax
:TRIGger[:SEQuence]:SOURce EXTernal1|EXTernal2|IMMediate|VIDeo|FMT|POWer
:TRIGger[:SEQuence]:SOURce?
Description
Sets the trigger source.
Queries the trigger source.
Parameter
Name
Type
Range
Default
——
Keyword
EXTernal1|EXTernal2|IMMediate|VIDeo|FMT|POWer
IMMediate
Remarks
EXTernal1: indicates External Trigger 1.
EXTernal2: indicates External Trigger 2.
IMMediate: indicates the free-run trigger.
VIDeo: indicates the video trigger. This command is only available for GPSA mode.
FMT: indicates the frequency mask trigger. This command is only available for RTSA mode.
Power: indicates the IF power trigger.
This command is only available for RTSA mode.
Return Format
The query returns EXT1, EXT2, IMM, VID, FMT, or POW.
Example
The following command sets the trigger source to free-run trigger.
:TRIGger:SEQuence:SOURce IMMediate
The following query returns IMM.
:TRIGger:SEQuence:SOURce?