Instructions

Chapter 2 Command System RIGOL
RSA5000 Programming Guide 2-21
:CALCulate:MARKer<n>:FCOunt:GATetime:AUTO
Syntax
:CALCulate:MARKer<n>:FCOunt:GATetime:AUTO OFF|ON|0|1
:CALCulate:MARKer<n>:FCOunt:GATetime:AUTO?
Description
Turns on or off the auto gate time for Marker n.
Queries the status of the auto gate time for Marker n.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6|7|8
——
——
Bool
OFF|ON|0|1
OFF|0
Remarks
This command is only available for GPSA mode.
Return Format
The query returns 1 or 0.
Example
The following command enables the auto gate time for Marker n.
:CALCulate:MARKer2:FCOunt:GATetime:AUTO ON or :CALCulate:MARKer2:FCOunt:GATetime:AUTO 1
The following query returns 1.
:CALCulate:MARKer2:FCOunt:GATetime:AUTO?
:CALCulate:MARKer<n>:FCOunt[:STATe]
Syntax
:CALCulate:MARKer<n>:FCOunt[:STATe] OFF|ON|0|1
:CALCulate:MARKer<n>:FCOunt[:STATe]?
Description
Enables or disables the frequency counter function of the specified marker.
Queries the status of the frequency counter function of the specified marker.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6|7|8
——
——
Bool
OFF|ON|0|1
OFF|0
Remarks
This command is only available for GPSA mode.
Return Format
The query returns 0 or 1.
Example
The following command enables the frequency counter function of Marker 2.
:CALCulate:MARKer2:FCOunt:STATe ON or :CALCulate:MARKer2:FCOunt:STATe 1
The following query returns 1.
:CALCulate:MARKer2:FCOunt:STATe?