Instructions

Chapter 2 Command System RIGOL
RSA5000 Programming Guide 2-25
:CALCulate:MARKer<n>:FUNCtion:BAND:SPAN:AUTO
Syntax
:CALCulate:MARKer<n>:FUNCtion:BAND:SPAN:AUTO OFF|ON|0|1
:CALCulate:MARKer<n>:FUNCtion:BAND:SPAN:AUTO?
Description
Enables or disables the band span auto function.
Queries the status of band span auto function.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6|7|8
--
--
Bool
OFF|ON|0|1
ON|1
Remarks
This command is only valid when the corresponding bandwidth function is enabled.
Return Format
The query returns 1 or 0.
Example
The following command enables the band span auto function of Marker 1.
:CALCulate:MARKer1:FUNCtion:BAND:SPAN:AUTO ON
or :CALCulate:MARKer1:FUNCtion:BAND:SPAN:AUTO 1
The following query returns 1.
:CALCulate:MARKer1:FUNCtion:BAND:SPAN:AUTO?
:CALCulate:MARKer<n>:LINes[:STATe]
Syntax
:CALCulate:MARKer<n>:LINes[:STATe] OFF|ON|0|1
:CALCulate:MARKer<n>:LINes[:STATe]?
Description
Enables or disables the marker line of the specified marker.
Queries the status for the marker line of the specified marker.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6|7|8
——
——
Bool
OFF|ON|0|1
OFF
Remarks
If the marker is not visible in the selected area, enable the marker line function to extend the marker line to
the display area for better observation.
The PvT only supports setting the marker on Trace 1.
Return Format
The query returns 0 or 1.
Example
The following command enables the marker line of Marker 1.