Instructions

RIGOL Chapter 2 Command System
2-26 RSA5000 Programming Guide
:CALCulate:MARKer1:LINes:STATe ON or :CALCulate:MARKer1:LINes:STATe 1
The following query returns 1.
:CALCulate:MARKer1:LINes:STATe?
:CALCulate:MARKer<n>:MAXimum:LEFT
Syntax
:CALCulate:MARKer<n>:MAXimum:LEFT
Description
Searches for and marks the nearest peak which is located at the left side of the current peak and meets the
peak search condition.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6|7|8
——
Remarks
When no peak is found, a prompt message "No peak found" is displayed on the screen.
Example
The following command performs one left peak search, and marks with Marker 2.
:CALCulate:MARKer2:MAXimum:LEFT
:CALCulate:MARKer<n>:MAXimum[:MAX]
Syntax
:CALCulate:MARKer<n>:MAXimum[:MAX]
Description
Performs one peak search based on the search mode set by the :CALCulate:MARKer:PEAK:SEARch:MODE
command and marks it with the specified marker.
Parameter
Name
Type
Range
Default
<n>
Discrete
1|2|3|4|5|6|7|8
——
Remarks
When no peak is found, a prompt message "No peak found" is displayed on the screen.
Example
The following command performs one peak search, and marks with Marker 2.
:CALCulate:MARKer2:MAXimum:MAX