Instructions

Chapter 2 Command System RIGOL
RSA5000 Programming Guide 2-63
:DISPlay:WINDow:TRACe:Y:DLINe:STATe
Syntax
:DISPlay:WINDow:TRACe:Y:DLINe:STATe OFF|ON|0|1
:DISPlay:WINDow:TRACe:Y:DLINe:STATe?
Description
Turns on or off the display line.
Queries the status of the display line.
Parameter
Name
Type
Range
Default
——
Bool
OFF|ON|0|1
OFF|0
Return Format
The query returns 0 or 1.
Example
The following command enables the display line.
:DISPlay:WINdow:TRACe:Y:DLINe:STATe ON or :DISPlay:WINdow:TRACe:Y:DLINe:STATe 1
The following query returns 1.
:DISPlay:WINdow:TRACe:Y:DLINe:STATe?
:DISPlay:WINDow:TRACe:Y[:SCALe]:NRLevel
Syntax
:DISPlay:WINDow:TRACe:Y[:SCALe]:NRLevel <rel_ampl>
:DISPlay:WINDow:TRACe:Y[:SCALe]:NRLevel?
Description
Sets the reference level of normalization.
Queries the reference level of normalization.
Parameter
Name
Type
Range
Default
<rel_ampl>
Consecutive Real Number
-200 dB to 200 dB
10 dB
Remarks
This command is only available for RSA5065-TG/RSA5032-TG working in GPSA mode.
This command is only valid when the tracking generator function is enabled.
Return Format
The query returns the reference level of normalization in scientific notation.
Example
The following command sets the reference level of normalization to -20 dB.
:DISPlay:WINDow:TRACe:Y:SCALe:NRLevel -20
The following query returns -2.000000e+01.
:DISPlay:WINDow:TRACe:Y:SCALe:NRLevel?