Specifications

4
Trigger Condition
(＞, ＜, =) Positive pulse width, (＞, ＜, =) Negative pulse width
Pulse Width Range
20ns ~10s
Video Trigger
Video Standard
Line Frequency
Support for standard NTSC, PAL and SECAM broadcast systems. Line
number range: 1~525 (NTSC) and 1~625 (PAL/SECAM)
Slope Trigger
Trigger Condition
(＞, ＜, =) Positive slope, (＞, ＜, =) Negative slope
Time Setting
20ns~10s
Alternate Trigger
Trigger on CH1
Edge, Pulse Width, Video, Slope
Trigger on CH2
Edge, Pulse Width, Video, Slope
Pattern Trigger
[2]
Pattern Type
D0~D15 select H, L, X, ,
Duration Trigger
[2]
Pattern Type
D0~D15 select H, L, X
Qualifier
＞, ＜, =
Time Setting
20ns~10s
Measurements
Cursor
Manual
Voltage difference between cursors (∆V)
Time difference between cursors (∆T)
Reciprocal of ∆T in Hertz (1/∆T)
Track
Voltage value for Y-axis waveform
Time value for X-axis waveform
Auto
Cursors are visible for Automatic Measurement
Auto Measure
Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Overshoot, Preshoot, Freq,
Period, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Delay1→2 ,
Delay1→2
Remarks:
[1] Only one channel is available when the Sample rate is 1GSa/s.
[2] For DS1000D Series.