User’s Guide RIGOL Publication Number UG-080318 March 2008 USB-GPIB 适配器 USB-GPIB Adapter Copyright ©1998-2008 RIGOL Technologies, Inc.
Copyright ©1998-2008 RIGOL Technologies, Inc. All Rights Reserved. z z z RIGOL products are protected by patent law in and out of P.R. China. Information in this publication replaces that in all previously corresponding material. RIGOL Technologies, Inc. reserves the right to modify or change part of or all the specifications and pricing policies at company’s sole decision. NOTE: RIGOL is registered trademark of RIGOL TECHNOLOGIES, INC. Copyright ©1998-2008 RIGOL Technologies, Inc.
RIGOL Safety Notices ENGLISH Review the following safety precautions carefully before operating the module to avoid any personal injuries or damages to the module and any products connected to it. To avoid potential hazards, use the module as specified by this user’s guide only. The instrument should be serviced by qualified personnel only. To Avoid Fire or Personal Injury. Connect and Disconnect Accessories. Do not connect or disconnect cables in running state.
RIGOL Avoid Circuit or Wire Exposure. Do not touch exposed connections and components when power is on. Do Not Operate With Suspected Failures. If suspected damage occurs with the instrument, have it inspected by RIGOL authorized service personnel before further operations. Do Not Operate in Wet/Damp Conditions. Do Not Operate in an Explosive Environment. Keep Product Surfaces Clean and Dry. Copyright ©1998-2008 RIGOL Technologies, Inc.
RIGOL RIGOL USB-GPIB Adapter Introduction ENGLISH RIGOL USB-GPIB Adapter used for RIGOL instrument with USB Host interface but without GPIB interface (for example DS1000 series oscilloscopes) connects to a GPIB controller. It is also a module that expands the GPIB interface for RIGOL instrument without GPIB interface, and enables the RIGOL instrument to be easier to work through GPIB interface.
RIGOL ENGLISH z LED indicator provides power status. Copyright ©1998-2008 RIGOL Technologies, Inc.
RIGOL Connection of the Adapter ENGLISH Connect the USB interface of the adapter to the USB Host interface of the RIGOL instrument and connect the GPIB interface of the adapter to the GPIB bus controller. LED Power Indicator Controller GPIB Adapter USB RIGOL Instrument USB-GPIB configuration of controller and instrument Note: This adapter is used for the RIGOL USB Host interface and connects to the GPIB bus controller. Cannot connect reverse. Please pay attention to the connection method.
RIGOL Copyright ©1998-2008 RIGOL Technologies, Inc. User’s Guide for USB-GPIB Adapter ENGLISH GPIB primary address of RIGOL instrument is assignable through the host instrument, the default GPIB primary address is 16.
RIGOL System Request ENGLISH Each adapter controls one instrument and does not support use of USB hubs. Attention May access LED Power Indicator gain the power supply information of the Adapter. After connecting and starting the instrument correctly, the LED Power Indicator of the adapter is not bright, please contact the RIGOL to confirm the malfunction. Please do not disassemble the Adapter yourself. 8 Copyright ©1998-2008 RIGOL Technologies, Inc.
RIGOL Warranty (USB-GPIB Adapter) RIGOL Technologies, Inc. warrants its products’ mainframe and accessories in materials and technics within the warranty period. During the period concerned, RIGOL guarantees the free replacement or repair of products which are approved defective. To get repair service or obtain a copy of the whole warranty statement, please contact the RIGOL sales and service office.
RIGOL characteristic and any particular purpose. ENGLISH RIGOL will not take any responsibility in cases regarding to indirect, particular and ensuing damage. 10 Copyright ©1998-2008 RIGOL Technologies, Inc.
RIGOL RIGOL has a professional and enthusiastic service and support team, to solve the technical problems in the application and provide the application solutions and product training service. z Maintenance service: You can get the maintenance free of charge during the warranty period. RIGOL suggests you purchase the Value Added Maintenance Service Plan to extend the warranty period and enjoy the overflow benefit.
RIGOL ENGLISH z Quick service: RIGOL promises product maintenance and calibration service accomplished within five working days and makes effort to reduce inconvenience caused by maintenance or calibration. RIGOL suggests you to purchase the Value Added Quick Service Plan, to enjoy the fastest maintenance achieved within 2 hours and 24-hour calibration service. RIGOL also provides you the quotation service, technical support, application solutions and system integration service.
RIGOL If you have any problem or requirement when using our products, please contact RIGOL Technologies, Inc. or your local distributors. Domestic: Please call Tel: (86-10) 8070 6688 Fax: (86-10) 8070 5070 Service & Support Hotline: 800 810 0002 9:00 am –5: 00 pm from Monday to Friday Or e-mail to: service@rigol.com Or mail to: RIGOL Technologies, Inc. 156# CaiHe Village, ShaHe Town, ChangPing District, Beijing, China Post Code: 102206 Overseas: Contact local RIGOL distributors or sales office.
