Owner`s manual

FIG.13
3.13 WIRE CONNECTION TO SWITCH
- Mount the green wire of the motor cable and power cable
to the grounding screw (A-FIG.13) on the switch plate.
- Insert the black and white switch terminals (B-FIG.13) to
the two switch terminal posts. The wires can be mounted
on either switch terminal post without the fear of crossing
them.
A
B
3.14 INSTALL SWITCH PLATE TO
HEADSTOCK
- Install the switch plate to headstock as shown in FIG.1.
- Install the two strain relief cord holders on the back of
headstock as shown in FIG.3.
10