User guide

Rimage AutoPrinter II


Installing ribbons
To install ribbons in the printer, stop any operations.
To change ribbons in a Prism printer, refer to the Prism Printer User Guide.
To change ribbons in an Everest II printer, refer to the Everest II Printer User Guide.
Printing discs
To print discs, use CD Designer or other software application to design and print your labels.
Refer to your printer user guide to configure the printer driver settings.
1. Place discs in bin 1 and 2 of the AutoPrinter.
2. In your software application, select Print.
3. Enter the desired number of copies.
4. Select OK. The AutoPrinter picks a disc and places it in the printer. After it is printed, the
AutoPrinter places the disc in an output bin. The AutoPrinter continues until all copies are
printed.
Note: If you have an Everest printer, and it has not printed a disc recently, it may take 2
minutes to warm up before it prints the first disc.
Note: When you are out of discs, an Out of paper message displays.
6 110656_G