User guide

Rimage AutoPrinter II
-
p
p
Technical support and product updates
Important! Register your Rimage AutoPrinter II online or complete and return the registration
card so Rimage can notify you of upgrades as they become available.
http://www.rimage.com/support_printers.html
Support for the Rimage AutoPrinter II is available through your authorized reseller.
Safety information
This manual and the indications on the product allow proper and safe operation. The indication
marks below help protect you and other persons from injury, and equipment from damage.
n
n
n
n
Warning! According to ANSI (American National Standards Institute) standards, a warning is
used to indicate situations that could result in bodily injury to personnel operating or
maintaining the equipment.
Caution: Indicates that failure to observe this guideline could result in loss or damage to the
equipment, product, software, or data.
To ensure safety, please read the precautions in the User Guide and familiarize yourself with their
meaning before using the equipment.
Warning: Please observe all warning and caution labels to ensure safety of personnel.
Warning: Replace all fuses with the same voltage and current ratings to maintain UL safety
approvals.
Warning: Use the supplied AC power cord, or use a safety agency-approved power cord.
Caution: Any equipment that has AC line voltage, or low DC voltages, such as switches,
power supplies, fuses, fans, non-stepper motors, must be replaced with Rimage–approved
components to maintain the safety approval issued by UL.
12 110656_G