Use Instruction
Table Of Contents
- Chapter I. About Manual
- Chapter II. Product Description
- 1. Product Description
- 2. Intended Use
- 3. Principle of Operation
- 4. Features
- 5. Specification
- 5.1. General Specifications
- 5.2. Technical Specification
- 5.3. RF Specification
- 6. Operating and Storage & Transport Conditions
- 7. Product Description
- 8. Symbols (Including Safety Signs)
- 9. Label and Packaging
- 10. Product Components (List of Critical Components)
- Chapter III. How to USE
- 1. Preparation Before Use
- 1.1. Training
- - Before use, refer to the video or training materials provided by the manufacturer.
- - The device must be used by well-trained, professional medical personnel for medical use only.
- - The device requires sufficient training before use.
- 1.2. Preparation of the Device
- 1.3. Power Check
- 1. General Precaution
- 2. General Warning
- 3. Interaction
- 4. Precaution to Use
- 5. Contraindications
- 6. Adverse Reaction
- 7. Warnings related to Wireless Communication
- 8. Guidance and Manufacturer’s Declaration
- Chapter V. Maintenance
- Chapter VI. Technical Contents
RIMS-IFU-001
/ Rev. 0 Page 25 / 34
4. Post-use Treatment
- EPIA device is single-use only; do not reuse the used device.
- Do not attempt to re-sterilize the device.
- Dispose used device according to hospital or government regulations regarding medical devices.
- After the use, wipe the cable clean with a disinfectant or disinfect it appropriately according to hospital
regulations.
- Syringe and needle are disposable; do not reuse them.
5. Storage and Transport Conditions
- Storage and transport temperature: -20 - 60
℃
- Avoid wet or humid places and store in a well-ventilated place.
- Avoid exposure to extreme temperature changes, humidity, dust, or corrosive vapors.
- Do not store in chemical storage areas or gas generation areas.
- Keep out of direct sunlight. Long exposure to sunlight can damage some parts.