Use Instructions


RIMS-IFU-001 /Rev.1  Page25/43

2. DeviceConnection 

2.1.
BluetoothConnection[EPIA‐HU‐B] 
① Turnonthedisplaydevice. 
② RuntheEPIAprogram.
③ Enterthepatientinformation(PatientName,Age,Gender)onthepatientinformationinputscreen.
Afteryoufillout,clicktheOKbuttontocontinue.


④ Click the “CONNECT” button 
ontheupperrightofscreentoconnecttheEPIAwiththe
displaydevice.
IfEPIAisnotconnectedproperlywiththedisplaydevice,reconnect the device by click the
“CONNECT”buttonagain. 
⑤ Clickthe“READ”buttontocompletethegraphscreenpreparation. 


IfBluetoothCommunicationisnotworkingwell,thedevicecanbeconnectedtoadisplaydevice
using data cable (USB cable) provided by manufacturer (optional).Forthecableconnection
method,pleasereferto“section2.2USBCableConnection[EPIA‐HU]ofChapterIII”.

