Technical data
14
31 Welding time
Use this key to
• change the welding time.
a) Increase the numeric value
b) Decrease the numeric value
With initialisation on the internal programme
selection switch (level 9), according to chapter 7
“Retooling”, the welding time is increased by a
factor of 10 (99.9s) and, with the corresponding
initialisation, it can be set to switch function
“ON-Off".
32 Hold time
This setting is not available for manual units.
33 Fixing screws
The fixing screws must be tight during operation!
34 Main switch
33
33
31
32