Operating instructions

9.2.2 System initialization process
A oscillating system must be connected.
Do not touch the horn.
1.
Press ON/OFF button.
2. The generator performs a self-test for two
seconds during start up.
3. Keep the SETUP key pressed during start up.
The display shows:
* SYSTEM--INIT *
CODE : 000
4. Using the cursor keys, set code to 472.
Acknowledge by pressing the
SETUP key.
5. Within the menus individual settings can be
selected with the
CLR key. Numerical input are
made with the cursor keys.
6. Jump to next function. Press NEXT key. The next
selectable function is displayed. To return to the
previous selectable function press
PREV key.
7. Quit SYSTEM - INIT with the SETUP key.
After the self-test the oscillating system is tested
for half a second.
50
RINCO ULTRASONIC
SWITZERLAND V2E0
* SYSTEM--INIT *
CODE : 000
* SYSTEM--INIT *
CODE : 472
* SYSTEM--INIT *
START : MANUAL
* SYSTEM--INIT *
TRIGGER : FU
* SYSTEM--INIT *
WELDTIME : EXT.
>> US-TEST <<
++++++++++++
>> READY <<
PART : 1234567
* SYSTEM--INIT *
VALVE : ON
* SYSTEM--INIT *
US-STOP : OFF