r Steplight Smart Lighting
Download the Ring app. The app walks you through setting up and managing your Ring Steplight. Search for "Ring" in one of these app stores, or visit: ring.
Set up your Ring Bridge. The Bridge connects your Ring Smart Lights to the Ring app and other compatible Ring devices. To set up your Bridge, follow the instructions in the Ring app or the Bridge user manual.
Insert the batteries. Using a flathead screwdriver, remove the screws from the back and lift off the battery lid. Then insert three C Cell batteries (not included), matching the flat ends with the springs.
Set up your Steplight in the Ring app. In the app, tap Set Up a Device. When prompted, select Smart Lights and follow the in-app instructions. r--0- -7 ..------~ I ·~~ Set Up a Device I Cancel I l I I Sc• Jril.y ( ams.
Attach the lid. Push the lid back onto your Steplight, and secure it with the screws you removed earlier. Mark the screw holles. Using the guide below, make a mark on the mounting surface below each arrow. If installing on a masonry surface, drill pilot holes and insert the included anchors.
Insert screws. 11 Drive the two mounting screws, leaving --1/4 exposed. 1/4 t7 Mount Steplight. Place your Steplight over the mounting screws and slide downward to lock it in place.
For additional help, visit: ring.com/help Or give us a call. .. us 1 800 656 1918 Canada 1 855 300 7289 Worldwide +1 310 929 7085 For a list of all our customer support numbers, visit: ring.com/callus To review your warranty coverage, please visit www.ring.com/warranty. Patents: www.ring.com/patents © 2019 Ring LLC or its affiliates. Ring, Alexa, Always Home, and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
• ring 1523 26th St. Santa Monica, CA 90404 Models: Ring Motion Sensor (C20), Ring Spotlight (C30), Ring Stepl1ght (C40), Ring Pathlight (C50), Ring Floodlight Battery (C3500), Ring Floodlight Wired (C5000), Ring Transformer (CT200) Canada CAN ICES-3 (B)/NM8·3(B) Innovation, Science and Economic Development Canada (ISED) Compliance This device contains license-exempt transm1tter(s)/rece1ver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s).
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
1. Download the Ring app. Open the app, tap Set Up a Device, then select Smart Lights. 2. Scan this code. This identifies your Ring to make setup fast and easy. "-J To review your warranty coverage, please vIsIt ww w rmg c.om warranty Patents: www ring com patent s Cl 2019 Ring LLC or ,ts arflhates Ring, Alexa, Always Hom
