Pathlight Smart Lighting
1. Set up your Pathlight. Download the Ring app. The app walks you through setting up and managing your Ring Pathlight. Search for “Ring” in one of these app stores, or visit: ring.com/app Download from Windows Store Set up your Ring Bridge. The Bridge connects your Ring Smart Lights to the Ring app and the rest of your Ring devices. To set up your Bridge, follow the instructions in the Ring app or the Bridge user manual.
Insert the batteries. Set up your Pathlight in the Ring app. Push in the lock button on the front of your Pathlight, and slide off the battery cover. In the app, tap Set Up a Device. Then insert four D Cell batteries (not included), flat end first, into the battery compartment. When prompted, select Smart Lights and follow the in-app instructions. Once setup is complete, slide the battery cover back onto your Pathlight.
2. Install your Pathlight. Place the stake. Gently drive the stake into the ground at your chosen location. Make sure the “Sensor Direction” arrow is pointing toward the area you want to monitor for motion. If you’re installing multiple Pathlights, space them 5-7 feet apart for the best motion sensing performance. Attach your Pathlight. Lower your Pathlight onto the stake and twist clockwise until it clicks to lock it into place.
For additional help, visit: ring.com/help Or give us a call… US 1 800 656 1918 Canada 1 855 300 7289 Worldwide +1 310 929 7085 For a list of all our customer support numbers, visit: ring.com/callus To review your warranty coverage, please visit www.ring.com/warranty. Patents: www.ring.com/patents © 2019 Ring LLC or its affiliates. RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its affiliates.