User manual

Screw the bolt into the side of
the swivel arm that has a recess.
Step 8
Attach the Swivel Arm to your Stick Up Cam
Use the provided bolt to attach the swivel
arm to the mounting point you selected in
the previous step.
Step 9
Install the Mount
Take everything to where you’ll be
installing your Stick Up Cam.
If you’re installing on stucco, brick or
concrete, use the quick release mount as
a template to mark the location of 4 holes
that you’ll drill in the next step.
Quick
Release
Mount
On wood or siding, skip this part, and
screw the bracket directly into your wall.
Installing the Mount (continued)
On stucco, brick, or concrete use the
provided drill bit to drill the 4 holes
that you marked in the previous step.
Then insert the wall anchors.
Installing the Mount (continued)
Use the Phillips head side of the Ring
screwdriver and the provided screws to
screw in the bracket you selected in step 5.
Step 10
Attach Your Stick Up Cam to the
Security Mount
Use the bolt you set aside in step 6 to
attach the camera to the security mount.
Step 11 (if using the quick
release mount)
Snap Your Stick Up Cam into the Quick
Release Mount
Push gently down on the tab and snap
your Stick Up Cam into place.
Double-press the orange button on the back of your
Stick Up Cam to trigger an alert in the Ring app. Use
this to find the best point of view for the camera.
Step 7
Select the Mounting Point You’d Like to Use
The swivel arm can attach to
any of the three points on the
back of your Stick Up Cam.
THE TOP MOUNTING
POINT is great for
installing Stick
UpCam on a ceiling.
THE MIDDLE
MOUNTING
POINT is great for
installing Stick Up
Cam on a wall.
THE BOTTOM
MOUNTING POINT is
great for installing
Stick Up Cam high on
a wall, or placing it
on a table.
8 9 10 11 12 13 14