User Manual

ManualsBrandsRING ManualsIP CCTV SystemsWLAN/Wi-Fi IP CCTV camera 1920 x 1080 pix

Installing your Ring Spotlight Cam Battery is a simple process. The steps below will help you

prepare and mount your Spotlight Cam.

Click here to watch a video tutorial for installing your Spotlight Cam Battery.

Step One - Charge the Battery

Before installing your Spotlight Cam, the included battery needs to be charged by using the

included orange USB cable. Please note that the amount of time it takes for the battery to charge

will vary depending on whether the USB cable is plugged into a wall socket or a USB port in a

computer or other device.

Note: Both the red and green lights on top of the battery will illuminate while charging, but only

the green light will be lit once fully charged.

Step Two - Insert the Battery

Follow these steps to insert the battery into your Spotlight Cam:

• Press the white button to open the battery compartment on your Spotlight Cam.

• Push the battery into the compartment until it clicks into place.

• Firmly close the battery compartment door

◦ Note: It may take a bit of pressure to completely close the compartment door. Be sure

to push on it until you hear the click that indicates the compartment is closed.

Ring Spotlight Cam Battery Installation – Ring Help https://support.ring.com/hc/en-gb/articles/115003340986

1 of 10 07/01/2022, 11:51

Summary of content (10 pages)

PAGE 1
Ring Spotlight Cam Battery Installation – Ring Help 1 of 10 https://support.ring.com/hc/en-gb/articles/115003340986 Installing your Ring Spotlight Cam Battery is a simple process. The steps below will help you prepare and mount your Spotlight Cam. Click here to watch a video tutorial for installing your Spotlight Cam Battery. Step One - Charge the Battery Before installing your Spotlight Cam, the included battery needs to be charged by using the included orange USB cable.
PAGE 2
Ring Spotlight Cam Battery Installation – Ring Help 2 of 10 https://support.ring.com/hc/en-gb/articles/115003340986 You will only need one battery for your Spotlight Cam to work properly. If you want extended battery life though, or want to avoid down time while charging the battery, a second battery is available for purchase. Step Three - Set up Your Spotlight Cam in the Ring App. Before physically installing your Spotlight Cam, it's important to set it up in your Ring App.
PAGE 3
Ring Spotlight Cam Battery Installation – Ring Help 3 of 10 https://support.ring.com/hc/en-gb/articles/115003340986 If installing on a wall: Before installing Spotlight Cam on a wall, insert the mounting plate with the ball socket pointing down. If installing on an eave: Before installing Spotlight Cam on an eave or overhang, insert the mounting plate with the ball socket pointing up.
PAGE 4
Ring Spotlight Cam Battery Installation – Ring Help 4 of 10 https://support.ring.com/hc/en-gb/articles/115003340986 Step Five - Identify a Mounting Plate Orientation Spotlight Cam comes with a mounting plate that, depending on its orientation, allows you to mount it on a wall or under an overhang. To mount your Spotlight Cam on a wall, insert the mounting plate with the ball socket pointing down. To mount on an overhang, insert the mounting plate with the ball socket pointing up.
PAGE 5
Ring Spotlight Cam Battery Installation – Ring Help https://support.ring.com/hc/en-gb/articles/115003340986 Step Seven - Mount the Spotlight Cam After installing your bracket, remove the security screw and push the ball on the back of Spotlight Cam into the socket until it pops into place. Position the camera with the motion detector parallel to the ground. Step Eight - Position the camera Using the live feed on your phone, position Spotlight Cam to your desired view.
PAGE 6
Ring Spotlight Cam Battery Installation – Ring Help 6 of 10 https://support.ring.com/hc/en-gb/articles/115003340986 sunlight a day. Mark the holes using the mounting arm as a template Install wall anchors (optional): If installing on a hard surface (such as stucco or brick), use the included drill bit to pre-drill the mounting holes, then insert the wall anchors. If installing on wood or siding, skip this step.
PAGE 7
Ring Spotlight Cam Battery Installation – Ring Help 7 of 10 https://support.ring.com/hc/en-gb/articles/115003340986 Attach the Solar Panel: Slot the Solar Panel onto the mounting arm, and make sure it’s secure. Adjust the panel angle: Loosen the screw on the mounting arm and adjust the panel to your desired angle, then re-tighten the screw to secure your setting.
PAGE 8
Ring Spotlight Cam Battery Installation – Ring Help 8 of 10 https://support.ring.com/hc/en-gb/articles/115003340986 Remove the seal: Remove the weatherproofing seal on the rear of your Spotlight Cam. Then, slot the mounting plate back into place. Plug in your Solar Panel: If your Solar Panel plug looks like example 1, simply insert it into the power port on the rear of your Spotlight Cam. Press the plug in firmly, until you feel it click into place.
PAGE 9
Ring Spotlight Cam Battery Installation – Ring Help 9 of 10 https://support.ring.com/hc/en-gb/articles/115003340986 If your plug has screw tabs: Insert the plug into the power port on the rear of your Spotlight Cam. Secure the plug with the included short screws. Do not use any other screws to secure the plug. Attach Spotlight Cam to the mounting bracket: First, fully loosen the metal collar on the bracket using the phillips end of the included screwdriver.
PAGE 10
Ring Spotlight Cam Battery Installation – Ring Help 10 of 10 https://support.ring.com/hc/en-gb/articles/115003340986 That's it.