User's Manual

Remove the rear cover.
Grasp the thin edge of the indoor
assembly body, and pinch the
cover at the indentations.
Pull the body and cover apart.
Set the cover aside for now.
You might need the included adapter.
It’s used with larger door view holes. Let’s find out if you’ll need it...
Remove the adapter from the Door View Kit tray and place it over the tube.
Slide the adapter towards the hole in your door.
If it DOES NOT slide in easily,
don’t force it through.
You won’t need the adapter.
If it DOES slide in easily,
insert the adapter until the
rim is flush with your door.
76