User's Manual

Place the indoor assembly.
Next, carefully slide the indoor assembly
onto the tube until it’s flush with your
door, making sure the outdoor assembly
isn’t pushed out the other side.
Remove the connector cable.
You may have to hold the outdoor assembly
in place to keep it from falling out; if you’ve
got a wide door, grab a partner.
Join the indoor and outdoor assemblies.
With the cable out of the way, place the tightening nut from the
Door View Kit tray over the tube and into the hole.
Using either the Door View Key or your fingers, twist clockwise and
tighten firmly to make sure your Door View Cam doesn’t rotate freely.
Once secure, check the outdoor assembly. It may shift slightly while
tightening, so make sure it’s level.
We tucked it into the
tube for safe travels,
but now it’s time to take
it out.
Grasp either side of
the exposed tab, and
delicately draw it out of
the tube until there’s no
more slack left.
98