Stick Up Cam Plug-In
1. Set up your Stick Up Cam. Installing outdoors? Remove the indoor plug faceplate by pressing the “PUSH” button and sliding it off of the adapter. Then grab the included outdoor power cable, and slide it’s connector onto the power adapter until it clicks into place. Download the Ring app. If you plan to install Stick Up Cam outdoors, secure the power adapter to a wall or floor with the included screws. The Ring app walks you through setting up and managing your Stick Up Cam.
Set up your Stick Up Cam in the Ring app. In the Ring app, select Set Up a Device. 2. Install your Stick Up Cam. When prompted, select Security Cams and follow the in-app instructions. Try it out! After setup, tap the Live View button in the Ring app to see live video from your Stick Up Cam. Choose a location. Stick Up Cam is happy just about anywhere, indoors or out. It comes ready to sit on a flat surface like a table or shelf, but can also be mounted to a wall.
Install the security screws (optional). How to use Stick Up Cam on a table or shelf: Your Stick Up Cam comes with two optional security screw locations. Place it at your chosen location, then plug it in. Your Stick Up Cam is now ready to protect you. One secures the battery compartment, and the other secures the mounting bracket to the base. To use them, open the battery compartment and/or remove the mounting bracket, then pop out the rubber plug(s).
How to install Stick Up Cam on a wall: Remove the mounting bracket. Slide it down to remove it from the base. Remove the base. Unscrew it using a standard Phillips-head screwdriver (not included). Drive the screws. Re-attach the base. Screw it into the back of your Stick Up Cam with the “UP” arrow on the bracket pointing upward. 8 Hold the bracket against your wall, making sure the “UP” arrow is pointing upward, and mount it with the included screws.
Mount your Cam. To install the base screw... Guide the grooves in the base onto the hooks on the bracket. Slide Stick Up Cam down to secure it to the wall. First, slide your Stick Up Cam off of the mounting bracket. Pop the rubber plug out of the base, then place Stick Up Cam back on the bracket. Secure with one of the provided screws. Check it out! Now plug your Stick Up Cam back in, and rotate it to your desired angle. Check out the live video in the Ring app to make sure you have the view you want.
For additional help, visit: ring.com/help Or give us a call… US 1 800 656 1918 Canada 1 855 300 7289 Worldwide +1 310 929 7085 For a list of all our customer support numbers, visit: ring.com/callus To review your warranty coverage, please visit www.ring.com/warranty. © 2019 Ring LLC or its affiliates. Ring and all related logos are trademarks of Ring LLC or its affiliates.
