Instruction Manual

Wiring the Elite Power Kit
The Elite Power Kit is a PoE injector that converts
internet into Power Over Ethernet out.
To get started, connect the Elite Power Kit to AC,
using the provided adapter.
Then, use the provided 3 foot ethernet cable to
connect your access point to the Internet In port on
the Elite Power Kit.
Run cable to your Ring Elite
Run the 50 foot cable to the location where you’ll be
installing Ring Elite.
Wiring Ring Elite to an internal doorbell is optional.
If you do so, shut off power at the breaker before
connecting your existing doorbell
wires to the small wire terminals
on the back of Ring Elite.
76