User Guide Video Doorbell (2nd Gen)
1. Set up your Video Doorbell. Download the Ring app. The Ring app walks you Lhrough setting up and managing your Video Doorbell. Search for "Ring" in one of the app stores below, or visit ring.com / app GET ITot~ Google Play Please make sure you have your wifi password ready for the next step.
Set up your Video Doorbell near your wifi router. In the Ring app, select Set Up a Device. When prompted, select Doorbells, and follow the in-app instructions. Try it out. After setup, push the button on the front of your Video Doorbell to see video frorn the camera in the Ring app. 0 4 If you have problems with video quality after installation, you may need to move your router clost!r to your door, or add a Ring Chime Pro. Learn more at: ring.
2. Install your Video Doorbell. Set your install height. Install your Video Doorbell approximately four feet (1.20 n1eters) above the ground for optimal performance. If you're connecting to existing doorbell wiring that's higher than four feet and want to angle your Video Doorbell down for a better view, you can purchase a Wedge Kit online at ring.com/ accessories. Camera field of view Motion detection range r-\
Steps for wiring to an existing doorbell Remove your existing doorbell. (optional) If replacing an existing doorbell, shut off power at the breaker. Then remove it from the wall and disconnect the wires. Your Video Doorbell is compatible with doorbell systems supplying 8-24 volts AC at SO or 60Hz, 40VA max. 8 Do not wire your V1oeo Doorbell to a DC-powered intercom system or other DC power source. Do you have an in-home chime? The chime can ring when the button on your Video Doorbell is pressed.
Insert the included mini-level. This helps to ensure the camera is parallel to the ground when you install your Doorbell.
Mark the screw holes. Use the bracket as a template to mark the four corner holes. The recommended install height is 4 feet above the ground. Install the anchors. (optional) If installing on stucco, brick, or concrete, marl~ 4 drill holes. Use a 1/4" masonry drill bit to drill holes in your wall, then insert the included anchors. If you're installing on wood, skip this step.
Install the mounting bracket. If you're wiring your Video Doorbell, feed your doorbell wires through the hole in the mounting bracket first. Using a Philips head screwdriver, drive the screws into your wall (or into the anchors, if installed) until they are nush with the mounting bracket.
Steps for wiring lo an existing doorbell Connect the wires. (optional) Connect the wires coming out of your wall to the screws on the back of your Video Doorbell. Either wire can connect to either screw. The order doesn•t matter. Your Video Doorbell is con1patible with doorbell systems supplying 8-24 volts AC, S0mA, at 50 or 60Hz) 40VA max. 8 8 10 If wiring directly to a doorbell transformer, connect a 25 ohrn.
Attach your Video Doorbell to the mounting bracket. Hook the slot on the rear of your Video Doorbell onto the tab near the top of the mounting bracket. Then, let the Doorbell pivot down to sit flush on its bracket.
Secure your Video Doorbell. Use the star-shaped end of the included screwdriver to drive the two security screws into the bottom of your Video Doorbell. Security Screw Wood Screw Important! DO NOT USE any screw other than the included short security screws when securing your Video Doorbell to the bracket. Your Video Doorbell is now ready to use. If you wired in your Video Doorbell, you can now restore power at the breaker.
Review, share and download. Your new device comes wilh a free 30-day trial of Ring Protect video recording service. To continue your subscription and save your videos, please v1s1t: n ng.
What is Ring Protect? Ring Protect is a subscription service that stores videos frorn your Ring devices. Why do I want it? Ring lets you interact with visitors and monitor your property in real time, while Ring Protect allows you review and share those videos anytime. How much does it cost? Ring Protect Basic covers one Ring device for $3 USO/month or $30 USO/year.* Ring Protect Plus covers all Ring devices at one property, and costs $10 USO/month or $100 USO/year.
• ring Fo r additional help, visit: ring.com/ help Or give us a call: us 1 800 656 1918 Canada 1 855 300 7289 Worldwide + 1 310 929 7085 AU 1 300 205 983 ~- ----~-------- - NZ + 64 9 887 987 1 ror a list of all our customer support numbers, visit : ring.com/ callus To rev,ew your warranty c.overage, please visit www.nng .
Quick Start 1 . Charge before use. 2 . Open the Ring app and select Set Up Device. Then follow the in-app instructions. 3 . Scan this code. This identifies your Ring device to make setup fast and easy. • For additional help, v1siL ring.
Important Product Information IMPORTANT PRODUCT INFORMATION Fi\. SAFETY INFORMATION : FAILURE TO FOLLOW THESE SAFETY UJ INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE. Your device has a water resistance rating of IPx4 and has been tested to withstand water splashes in all directions from an oscillating spray. However, your device is not intended for underwater use.
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, 1f not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
