User Guide

○
○
Figure F: Pass the 3-foot antenna cable through the hole one by one.
Figure G: Connect the cable to the four (4) antenna connectors using the installation steps.
○
○
○
Figure H: Fix the antenna mounting bracket on the mounting pole and tighten the two(2) pipe clamps.
Figure J: Put the antenna cover on.
Figure K: Tighten the four (4) screws with an H2.5 screwdriver.
3. Antenna Cable Connection Orders
○
○
Figure L: Use a 12-gauge or smaller wire gauge to connect the connectors.
Figure L: Connect the cable to the base unit.
Draft