User Guide Floodlight Cam Wired Pro
WARNING: Risk of electrical shock. Disconnect power at the fuse or circuit breaker before installing. Verify that the supply voltage is correct. Connect fixture to a 100 VAC~240 VAC 50/60 Hz power source. Properly ground fixture. Always follow code standards when installing wired connections. CAUTION: Risk of fire. Do not install near combustible or flammable surfaces. NOTICE: Do not connect this light fixture to a dimmer switch or timer.
Quick Start 1. Open the Ring app and select Set Up a Device. Then follow the in-app instructions. 2. Scan this code. This identifies your Ring device to make setup fast and easy.
Shut off power at the breaker! You’ll be working with electrical wires during the install process. If you don’t know where your breaker is or how to turn off power to your floodlight circuit, we recommend you hire a licensed electrician.
Prep your Floodlight Cam for installation. First, rotate the lights out of the way, like this… If you’re mounting on an eave or overhang, your camera is already in position. If you’re mounting to a wall, rotate the camera into position like this...
Remove your existing floodlight. With power off at the breaker, remove your existing floodlight from the junction box it’s attached to and disconnect the wires. If there is a metal bracket attached to your junction box, remove that as well.
Choose your screws. Select a set of screws from the bags marked “A” through “F” that fit your junction box to secure the metal mounting bracket. One size does not fit all here, so we sent several. Save a screw from either Bag B or C. You will use it on the next page. Bag A Standard screws. These should fit most junction boxes. Bag B & C Longer screws to reach the screw holes in recessed junction boxes. Bag D, E & F Best for older boxes with smaller screw holes. Attach the metal mounting bracket.
Install the plastic mounting plate. Pull gently from the opening of the plastic plate to free it from the fixture, then feed your power wires though the opening. With your power wires fed through the mounting plate, center it over the metal mounting bracket. If you’re installing on a wall, the “UP” arrow should point up. If you’re installing under an eave, it should point towards the wall. Then, insert one of the screws from Bag B or C into the center hole, and tighten to secure.
Hang it up. Locate the nylon strap on the back of your Floodlight Cam light fixture, and loop the buckle at the end over the hook on the mounting plate. Make sure the buckle and hook are secure before releasing the light fixture.
Connect the wires. The green wire on your Floodlight Cam is the ground wire. With power still off at the breaker, use a wire nut from the bag marked “G” to connect the green (or ground) wire from your Floodlight Cam to the green wire coming from your junction box. The white wire on your Floodlight Cam is a neutral wire. Use another wire nut from the bag marked “G” to connect the white wire from your Floodlight Cam to the white (or neutral) wire coming from your junction box.
Mount the light fixture. Tuck the power wires into the junction box, then align the two holes on the light fixture with the threaded posts on the plastic mounting plate. Slide the light fixture onto the posts and push it firmly into place. Secure your fixture using two of the hex cap nuts from Bag G over the ends of the threaded posts. Remove the reversible bit from the included screwdriver and use the handle to tighten the hex cap nuts.
Restore power at the breaker. Now that your Floodlight Cam is installed, you can turn power back on at the breaker. The lamps on your Floodlight Cam will flash once it’s powered on. Complete setup in the Ring App. Once your Floodlight Cam powers on, follow the instructions to continue with setup in the app.
Review, share and download. Your new device comes with a free 30-day trial of our Ring Protect video recording service. To continue your subscription and save your videos, please visit ring.
What is Ring Protect? Ring Protect is a subscription service that stores videos from your Ring devices. Why do I want it? Ring lets you interact with visitors and monitor your property in real time, while Ring Protect allows you review and share those videos anytime. How much does it cost? Ring Protect starts at $3 USD/month or $30 USD/year per Ring doorbell or camera.* How do I sign up? Simply log into your Ring account at ring.com/protect-plans, and follow the on-screen instructions.
For additional help, visit ring.com/help Or give us a call US 1 800 656 1918 Canada 1 855 300 7289 Worldwide +1 310 929 7085 For a list of all our customer support numbers, visit ring.
For information on our warranty, theft protection, and Ring Protect Plans, visit ring.com/legal © 2021 Ring LLC or its affiliates. Ring and all related marks are trademarks of Ring LLC or its affiliates.
Important Product Information
/;\. l.tJ SAFETY INFORMATION: FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRICSHOCK, OR OTHER INJURY OR DAMAGE. WATCH FOR SMALL PARTS. The device and accessories may present a choking hazard to small chi ldren and pets. Keep them out of reach of small children and pets. WARNING : Electrical shock hazard. Disconnect power to installation area at your circuit breaker or fuse box before beginning installation. Always use caution when handling electrical wiring.
Verify that the supply voltage is correct. Connect fixture to a 100 VAC~ 240 VAC 50/60 Hz power source. Properly ground fixture Always install wiring connections in accordance with local code standards. Product Specifications Device Name: Ring Floodlight Cam Wired Pro Model Number: 5828S4 Electrical Rating: Hardwired (100 to 240V) Temperature Rating: -5°F to 118°F (·20.5°C to 48°C) RECYCLING YOUR DEVICE PROPERLY In some areas, the disposal of certain electronic devices Is regulated.
FCC RADIATION EXPOSURE STATEMENT This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all p~rsons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Protected by Audio/Video Su rvei I lance ., ' ,,. . 800.656.191 8 "- ... .. ·. . ti -, ... • ..... ., . • r . .. ,;, ·:. 1·~ ·1 • •• ,!. - . . ' . • ,,,. .. ) .. '. : , • ,.; • • '11 .. ' , '.\ f . . . : . . .. .. ' : '0 ' : ' . ' J I • ,.<~ ·'. ~~-, ~~-~ :.r -,. ·, -~- ~-:. . ,·_. ,; : '-._. ~--. ·::~ ·. r ' 4• I~:,: I ·, •.' -j, •"· • I< . • - . . . . t ~ .\P : ~· : .J • ·, • • ~ ;,,_ ':" - • . ' •. . I • , . .. • ' , J:, ' , • l ,: ..~··.
At Ring, our mission is to reduce crime in neighborhoods. Let every visitor know your home is protected by Ring with this sticker. Connect with us and share pictures of where you stick it at: 0 0 facebook.com/ring twitter.com/ring Ci instagram.
