User Guide Doorbell 4
Quick Start 1. Remove battery. Fully charge before use. 2. Open the Ring app and select Set Up a Device. Then follow the in-app instructions. 3. Scan this code. This identifies your Ring device to make setup fast and easy.
Included installation hardware.
Remove the faceplate. Firmly grasp the bottom of the faceplate and pull to remove. Take out the battery. Press the metal tab in and slide the battery out.
Charge the battery. Fully charge the battery by plugging it into a power source using the provided orange cable. The red light will turn off once it's fully charged. - Charging - Charged Insert the battery. After charging, insert the battery in the bottom of your Ring Doorbell until it clicks into place.
Download the Ring app. The Ring app walks you through setting up and managing your Ring Doorbell. Search for "Ring" in one of the app stores below, or visit ring .com/ app • ~ A oop wnploasd otnoth r•e 11111,.. ,:: GET IT ON Google Play Do you have an in-home chime? The chime can ring when the button on your Ring Doorbell is pressed. To set this up, just follow the instructions in the app. Don't have an in-home chime? If you see the "No In-Home Chime" button during setup, be sure to press it.
Set up your Ring Doorbell near your wifi router. In the Ring app, select Set Up a Device and follow the in -app instructions. Try it out. After setup, push the button on the front of your Ring Doorbell to see video from the camera in the Ring app. nng @ 00 0 If you have problems with video quality after installation, you may need t o move your router closer to your door, or add a R·ng Chime Pro. Learn more at: ring.
Install your Ring Doorbell. For the best results, mount it around four feet (1.20 meters) above the ground. If you're connecting to existing doorbell wiring that's higher than four feet and want to angle your Ring Doorbell down for a better view, you can purchase a Wedge Kit onl1ne at ring .com/ accessories. Camera field of view Motion detection range ... . i 4 feet (1 .
Optional: Remove your existing doorbell. If connecting to existing doorbell wires, shut off power at the breaker. If you're not sure which breaker controls your doorbell, turn off the master breaker for your home, or contact an electrician. Once power is turned off, remove the doorbell button from the wall and disconnect the wires. Your Ring Doorbell is compatible with doorbel l systems supplying 8-24 volts AC at 50 or 60Hz, 40VA max.
You'll need to install wall anchors when installing on stucco, brick, or concrete (skip ahead to page 12 ,f installing on wood). We sent you two sets of wall anchors. Let's figure out which ones you'll need, and how to install them. ✓ )( If installing directly to your wall, grab 4 of the wall anchors from Bag A. Using your Ring Doorbell as a template, mark 4 drill ho les on the wall. Use a 1/4" masonry drill bit (not included) to drill the holes, then insert the 4 wall anchors.
Optional: Install the wall anchors. (continued) If you're using the Corner Mount, grab 2 of the wall anchors from Bag C. Using your Corner Mount as a template, mark 2 drill holes on the wall. Use a 1/4" masonry drill bit (not included) to drill the holes, then insert the 2 wall anchors.
Optional: Secure the wires to the terminals. To connect your existing doorbell wires, loop one doorbell wire around each of the screw terminals on the rear of your Ring Doorbell then tighten to secure. It doesn't matter which wire connects to which screw. If your doorbell wires are too short to reach your Ring Doorbell, you can attach the included wire extenders using the included wire nuts.
Secure your Ring Doorbell. If you connected to existing doorbell wires, feed all the wires (and the wire nuts and extenders, if you used them) into your wall before securing your Ring Doorbell. If mounting directly to the wall, use 4 of the provided Short Mounti ng Screws from Bag A to secure your Ring Doorbell di rectly to the wall.
Secure your Ring Doorbell. (continued) If using the Corner Mount, use 2 of the Medium Bracket Screws from Bag C to secure the Corner Mount to the wall, then use 2 of the Short Bracket Screws from Bag C to secure your Ring Doorbell to the Corner Mount. The Corner Mount can be painted to match your home. 1 e~ Medium Bracket Screw 2 ,.
Optional: Restore power at the breaker. If you connected to existing doorbell wires, turn power back on at the breaker. I s(l}r I@, lii I j-. I '" ~l ' I I I :l :~ s i ' ' :, -- ~ Ii Ci) I .-) '-\ ~ ~ \ ';-..
Install the faceplate. Place the faceplate on your Ring Doorbell by slotting it in at the top and clicking it into place.
Secure the faceplate. CAUTION! If you use the wrong screws to secure the faceplate, you could damage the battery during installation, create a fire hazard, and be seriously injured. DO NOT USE any screw other than the included short security screws when securing the faceplate. Lastly, use the included screwdriver to insert and tighten one of the Security Screws from Bag B. Your Ring Doorbell is now ready to use.
Review, share and download. Your new device comes with a free 30-day trial of our Ring Protect video recording service. To continue your subscription and save your videos, please visit ring .
What is Ring Protect? Ring Protect is a subscription service that stores videos from your Ring devices. Why do I want it? Ring lets you interact with visitors and monitor your property in real time, while Ring Protect allows you review and share those videos anytime. How much does it cost? Ring Protect starts at $3 USO/ month or $30 USO/ year per Ring doorbell or camera.* How do I sign up? Simply log into your Ring account at ring.com/ protect-plans, and follow the on-screen instructions.
For additional help, visit ring.com/ help Or give us a call us 18006561918 Canada 1 855 300 7289 Worldwide + 1 310 929 7085 For a list of all our customer support numbers, visit ring.com /callus For information on our warranty, theft protection, and Ring Protect Plans, see ring.com/legal '> 2021 Ring LLC or its affiliates. Ring and all related marks are trademarks of Ring LLC or its affiliates.
Important Product Information IMPORTANT PRODUCT INFORMATION SAFETY INFORMATION: FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE. WARNING: Electrical shock hazard. Disconnect power to installation area at your circuit breaker or fuse box before beginning installation. Always use caution when handling electrical wiring. Installation by a qualified electrician may be required in your area.
immerse or expose to water or other liquids. Do not expose the battery to fire, explosion or other hazard. Promptly dispose of used batteries in accordance with applicable laws and regulations. If dropped and you suspect damage, take steps to prevent any ingestion or direct contact of fluids and any other materials from the battery with skin or clothes. RECYCLING YOUR DEVICE PROPERLY In some areas, the disposal of certain electronic devices Is regulated.
your purchase, Ring will replace the stolen device at no charge to you. This theft protection is not transferable and applies only to the original consumer purchaser. Coverage of this theft protection is limited to one (1) replacement only for each Ring camera or doorbell product that you have purchased. Theft protection does not apply to any products purchased from third party sellers on eBay and other online marketplaces.
the nature of the problem and to provide proof of purchase. You will also be required to return your existing device in accordance with directions that will be provided by Ring. Ring has no warranty obli• gations with respect any products that are excluded from warranty pursuant to Paragraph 2 above, as reasonably determined by Ring, and the owner of such device shall bear all shipping costs for the return of such product to owner.
, • I
