Owner's Manual
Table Of Contents
- User Guide
- Quick Start
- Included installation hardware
- Remove the faceplate
- Take out the battery
- Charge the battery
- Insert the battery
- Download the Ring app
- Do you have an in-home chime
- Don't have an in-home chime
- Set up your Ring Doorbell near your wifi router
- Try it out
- Install your Ring Doorbell
- Optional: Remove your existing doorbell
- Optional: Install the wall anchors
- Optional: Secure the wires to the terminals
- Secure your Ring Doorbell
- Optional: Restore power at the breaker
- Install the faceplate
- Secure the faceplate
- Review, share and download
- What is Ring Protect
- Important Product Information
Optional: Secure
the
wires
to
the terminals.
To connect your existing doorbell wires,
loop
one
doorbell
wire
around
each
of
the
screw
terminals
on
the rear
of
your
Ring
Doorbell
then
tighten
to
secure.
It
doesn't
matter
which
wire
connects
to
which screw.
If
your
doorbell
wires are
too
short
to
reach
your
Ring
Doorbell,
you can attach the
included
wire
extenders using
the
included
wire
nuts.
12