Ring Alarm Outdoor Contact Sensor Z-Wave Technical Manual 1
Ring Outdoor Contact Sensor Introduction The Ring Alarm Outdoor Contact Sensor is a wireless sensor for use with the Ring Alarm security system. It provides users the ability to know when an outdoor window, door, gate or shed is open or closed. After installing the sensor and setting it up in the Ring app, monitor and receive notifications when the door or window opens or closes.
Z-Wave Instrucitons Z-Wave Device Type: Notification Sensor Role Type: Reporting Sleeping Slave (RSS) • GENERIC_TYPE_SENSOR_NOTIFICATION (0x07) • SPECIFIC_TYPE_NOTIFICATION_SENSOR (0x01) Z-Wave Long Range This device supports both Classic Z-Wave and Z-Wave Long Range. Z-Wave long range capable controllers can include this device as a device in the network. Long range mode allows for a much greater operating range of the device.
LED Behavior for Inclusion Blink Pattern Smart Start Started Green LED three times, repeated after a brief pause Classic Inclusion Started Green LED three times, repeated after a brief pause Classic Inclusion Timed-Out Alternate red and green a few times Inclusion Successful (Authenticated S2) Green LED on solid Inclusion Not Successful (Self-Destruct) Red LED on solid Removing a Sensor to a Z-Wave Network Exclusion Instructions: 1.
Wake-Up Notification The sensor will wake up every so often to send a Wake-Up Notification to allow the life line master node controller that the sensor is now available for any queued messages that the controller may have for the sensor.
Association Command Class Group Identifier 1 (Lifeline) Max Nodes 0x05 Description 1. Notification Report a. See notification CC section for notifications that are sent 2. Battery Report 3. Device Reset Locally Notification Configuration Command Class The sensor has the following supported configuration parameters. 6 Parameter No. Description Number Default of Bytes 1 Heartbeats: This parameter is the number minutes between heartbeats.
Notification Command Class, V8 Sensor Condition Command Class and Value Notification Report Association Group Door/Window Open Type: Home Security 0x07 State: Intrusion 0x02 1 (Lifeline) Door/Window Close Type: Home Security 0x07 State: Previous Events Cleared 0x00 Event parameter: 0x02 1 (Lifeline) Sensor Case Removed Type: Home Security 0x07 State: Tampering Product Covering Removed 0x03 1 (Lifeline) Sensor Case Fastened Type: Home Security 0x07 State: Previous Events Cleared 0x00 Event Param
