82mm 146mm Beams Battery Floodlight
1. Connect your Battery Floodight. Download the Ring app. The app walks you through setting up and managing your Floodlight. Search for “Ring” in one of these app stores, or visit: ring.com/app Set up your Ring Beams Bridge. The Bridge connects your Ring Beams lights to the rest of your Ring system. Your Bridge must be up and running before you set up your Floodlight. Download from Store To set up Windows your Bridge, follow the instructions in the Ring Download from app or Bridge user manual.
Insert the batteries. Set up your Floodlight in the Ring app. Twist and pull off the front of the light, then press the side buttons on the battery compartment to open. In the app, tap Set Up a Device. Insert four D-cell batteries. 4 Doorbells Security Cams Chimes When prompted, select Beams and follow the in-app instructions. Beams Alarm Once setup is complete, slide the battery cover back onto your Floodlight.
2. Install your Floodlight. Hold the base against the surface and drive the three mounting screws. The arrow marked “UP” on the base should point upwards once the base is mounted. Press the tab on the side of the base, and slide the base off of your Floodlight. Use the base as a template to mark the screw holes. 6 Align your Floodlight with the base and slide it to the left to lock it in. The motion sensor is adjustable. Try various angles for the best performance.
For additional help, visit: ring.com/help Or give us a call… US 1 800 656 1918 Canada 1 855 300 7289 Worldwide +1 310 929 7085 For a list of all our customer support numbers, visit: ring.com/callus To review your warranty coverage, please visit www.ring.com/warranty. Patents: www.ring.com/patents © 2018 Ring LLC or its affiliates. RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its affiliates.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.