User's Manual

Screwdriver
Use the Phillips bit for installing the
mounting bracket and the socket bit
to tighten the screw cap covers.
Phillips Bit
Socket Bit
Mounting Bracket
This bracket screws into your
junction box before attaching to
your Floodlight Cam.
Before you begin
Check out all the stu in the box.
These instructions assume you’re replacing an existing
floodlight and/or have a junction box where Floodlight
Cam can be mounted. If you don’t have a junction box,
then you’ll need to hire an electrician to install one.
Bracket Screw (5)
Use 2 to 4 of these to attach the supplied
bracket to your junction box.
Wire Nuts (3)
Use these to connect Floodlight Cam’s wires
to your existing wires.
Screw Cap Covers (2)
Use these to cover the ends of the posts on
the mounting bracket after installation.
Hook
Hang your Floodlight Cam while connecting
the wires.
54