User's Guide

devices is regulated. Make sure you dispose of,
or recycle, your device in accordance with your
local laws and regulations. For information about
recycling your device, go to www.amazon.com/
devicesupport.
Terms of Service and Warranty
By purchasing or using the product, you agree to
the Terms of Service found at ring.com/terms.
For information on our warranty, theft protection,
and Ring Protect Plans, see ring.com/legal
For Consumers in the USA
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B digi-
tal device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a resi-
dential installation. This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be deter-
mined by turning the equipment o and on, the
user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/
TV technician for help.
Pursuant to Section 15.21 of the FCC rules,
changes or modifications to a Product by the
user that are not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment.
The device meets the FCC Radio Frequency Emis-
sion Guidelines. Information on the product is on
file with the FCC and can be found by inputting
such Product’s FCC ID (which can be found on the
device) into the FCC ID Search form available at
https://www.fcc.gov/oet/ea/fccid.
The party responsible for FCC compliance is:
Ring LLC, 1523 26th St, Santa Monica, CA USA,
90404
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure
limits set forth for an uncontrolled environment
and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and
operated in accordance with provided instruc-
tions and the antenna(s) used for this transmit-
ter must be installed to provide a separation
distance of at least 20 cm from all persons and
must not be co-located or operating in conjunc-
tion with any other antenna or transmitter.
End-users and installers must be provided with
antenna installation instructions and consider
removing the no-collocation statement.
For Consumers in Canada
This device contains licence-exempt transmit-
ter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to
the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference,
including interference that may cause
undesired operation of the device.
Information Regarding Exposure
to Radio Frequency Energy
This equipment complies with IC RSS-102 RF
exposure limits set forth for an uncontrolled
environment.
Radio Frequency Compliance
In order to protect human health, this device
meets the thresholds for exposure of the general
public to electromagnetic fields according to
Council Recommendation 1999/519/EC.
This transmitter must not be co-located or oper-
ating in conjunction with any other antenna or
transmitter. This equipment should be installed
and operated with a minimum distance of 20
centimeters between the radiator and your body.
Your Ring Video Doorbell Wired is designed to
replace an existing doorbell button, and gets its
power from the doorbell system.
Ring_INBOX_WSL_GrahamCracker_DoorbellWired_EN_v2d_GH.indd 4-5Ring_INBOX_WSL_GrahamCracker_DoorbellWired_EN_v2d_GH.indd 4-5 11/10/20 12:14 PM11/10/20 12:14 PM