User's Manual

Elite Power Kit
Includes power adapter and plugs for
dierent types of outlets
3’ Ethernet Cable
Use this cable to connect the Elite Power
Kit to your internet access point.
50’ Ethernet Cable
Run this cable from the Elite Power Kit to
your Ring Doorbell.
Elite Mounting Bracket (optional)
If installing Ring Elite on an existing
junction box, you don’t need to use this
bracket. If you do use this bracket, you
should remove the existing junction box.
Mounting Screws (5)
Attach Ring Elite to the bracket with two
screws. Use two other screws to attach the
Elite Power Kit to your wall, if you’d like.
Before you begin
Check out all the stuff in the box.
Screwdriver Handle
Screw Bit
Use the Phillips end for installation. If you
are securing existing doorbell wires in the
small connectors on the back of Ring Elite,
use the flathead end.
Flexible Bit
Use it for screwing the security screw into
the bottom of Ring Doorbell Elite after
installing the faceplate.
Security Screws (2)
Use one to secure the faceplate. Put the
other one in your toolbox for the inevitable
moment that the first one gets dropped in
the bushes.
Faceplates (4)
Select the color that best matches your
home…or your mood.
54