User Manual

Select a cable to wire your Transformer to your light fixtures
using the chart below.
Decide where you would like to place your lights, and arrange them
in the desired locations.
Choose a cable.
2. Install lights and wiring.
Place light fixtures.
Connect to Transformer.
Open the wiring cover to expose the
terminals, and lock the door in place.
Strip and split the cable. Feed one
end into the Common terminal,
and the other into the 12V or 15V
terminal, based on the cable you
chose. Close the wiring cover.
Then run the cable to each fixture,
making the necessary connections.
54
Landscape_Transformer_Manual_Cert.indd 5 10/11/18 4:58 PM