User's Manual

4 feet
(48 inches)
Remove
your existing
doorbell
(optional)
If replacing an
existing doorbell,
shut o power at the
breaker. Then remove
it from the wall and
disconnect the wires.
Select an install height
Install your Ring Doorbell four feet off the
ground for optimal performance.
If you’re connecting to existing doorbell
wiring that’s higher than four feet, thus
limiting where you can install Ring
Doorbell, use the provided wedge mount
to angle your Ring Doorbell down.
Camera field of view
Motion detection range
If wiring your Ring Doorbell to an
existing doorbell, a transformer with
a voltage of 8–24VAC is required.
If wiring directly to a transformer, a
resistor must be used.
DC transformers and most
intercoms are not supported.
1312
1. In-app Setup 2. Physical Installation 3. Features 4. Troubleshooting
1. In-app Setup2. Physical Installation3. Features4. Troubleshooting