User Manual

Remove your existing doorbell. (optional)
If replacing an existing doorbell, shut o power at the breaker. Then remove it from the wall and disconnect the wires. If your doorbell transformer supplies 8-24 volts AC, we suggest wiring in your Video Doorbell. This enhances performance and extends battery life.
If wiring directly to a doorbell transformer, connect a 25 ohm, 50W wirewound resistor in series with one of the doorbell wires to protect your Video Doorbell. Do not wire your Video Doorbell to a DC-powered intercom system or other DC power source.
Steps for wiring to an existing doorbell
Insert the mini-level.
Insert the mini-level into your Video Doorbell to make sure it’s even when you install it.
1312
RVD3_manual_NO-DIODE.indd 13 10/8/19 12:31 AM