User Guide Video Doorbell 4 Brand: Ring Model: 5D22E9
Included installation hardware. Charge the battery. Bag First, fully charge the battery by plugging it into a power source using the provided orange cable. Hardware A (5) Short Mounting Screws To mount Ring Doorbell directly to a wall (5) Wall Anchors To install on concrete, stucco, or brick B The small light on top will glow green once fully charged.
Download the Ring app. The Ring app walks you through setting up and managing your Ring Doorbell. Search for “Ring” in one of the app stores below, or visit ring.com/app Set up your Ring Doorbell near your wifi router. In the Ring app, select Set Up a Device and follow the in-app instructions. When prompted, select Doorbells, and follow the in-app instructions. Try it out.
Install your Ring Doorbell. Install your Ring Doorbell approximately four feet (1.20 metres) above the ground for optimal performance. If you’re connecting to existing doorbell wiring that’s higher than four feet and want to angle your Ring Doorbell down for a better view, you can purchase a Wedge Kit online at ring.com/accessories. Camera field of view Motion detection range 4 feet (1.
Install the anchors. Secure your Ring Doorbell. If installing on stucco, brick, or concrete, mark 4 drill holes using the Ring Doorbell as a template. Then, use a 1/4” masonry drill bit to drill holes in your wall, and insert four of the included wall anchors. Use four of the provided Short Mounting Screws to secure your Ring Doorbell directly to the wall. (If you’re installing on wood, skip this step.
Install the faceplate. Secure the faceplate. Place the faceplate on your Ring Doorbell by slotting it in at the top and clicking it into place. Lastly, use the included screwdriver to insert and tighten one of the Security Screws. Your Ring Doorbell is now ready to use. If replacing an existing doorbell or using the included Corner Mount, continue to page 12.
Optional: Remove your existing doorbell Optional: Install the Corner Mount If replacing an existing doorbell, shut off power at the breaker. Then remove the doorbell button from the wall and disconnect the wires. If you’re not sure which breaker controls your doorbell, turn off the master breaker for your home, or contact an electrician.
Optional: Install the Corner Mount Optional: Connect to existing doorbell wires Install the Corner Mount Connect the wires coming out of your wall to the screws on the back of your Ring Doorbell. Use the Medium Bracket Screws to secure the Corner Mount to your wall. Use the Short Bracket Screws to secure your Ring Doorbell to the mount. If connecting to existing doorbell wiring, feed the wires through the back of the Corner Mount before securing the Corner Mount to the wall.
Optional: Connect to existing doorbell wires Optional: Connect to existing doorbell wires If you have trouble connecting the wires coming out of your wall to the back of your Ring Doorbell, use the provided wire extensions and wire nuts. Feed all the wires (and the wire nuts, if you used them) into your wall and secure your Ring Doorbell to the wall using four of the provided Short Mounting Screws.
Optional: Connect to existing doorbell wires Optional: Connect to existing doorbell wires Install the faceplate. Secure the faceplate. Place the faceplate on your Ring Doorbell by slotting it in at the top and clicking it into place. Lastly, use the included screwdriver to insert and tighten one of the Security Screws. Your Ring Doorbell is now ready to use.
Review, share and download. What is Ring Protect? Your new device comes with a free 30-day trial of Ring Protect video recording service. Ring Protect is a subscription service that stores videos from your Ring devices. To continue your subscription and save your videos, please visit ring.com/protect-plans Why do I want it? Ring lets you interact with visitors and monitor your property in real time, while Ring Protect allows you review and share those videos anytime.
For additional help, visit ring.com/help Or give us a call US 1 800 656 1918 Canada 1 855 300 7289 Worldwide +1 310 929 7085 For a list of all our customer support numbers, visit ring.com/callus For information on our warranty, theft protection, and Ring Protect Plans, see ring.com/legal © 2020 Ring LLC or its affiliates. Ring and all related marks are trademarks of Ring LLC or its affiliates.
XX-XXXXXX-XX
Important Product Information IMPORTANT PRODUCT INFORMATION SAFETY INFORMATION: FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE. WARNING: Electrical shock hazard. Disconnect power to installation area at your circuit breaker or fuse box before beginning installation. Always use caution when handling electrical wiring. Installation by a qualified electrician may be required in your area.
your purchase, Ring will replace the stolen device at no charge to you. This theft protection is not transferable and applies only to the original consumer purchaser. Coverage of this theft protection is limited to one (1) replacement only for each Ring camera or doorbell product that you have purchased. Theft protection does not apply to any products purchased from third party sellers on eBay and other online marketplaces.
