83.5mm 83.5mm Beams Bridge RIN-MN00001-AP USER MANUAL RING BEAMS BRIDGE ENGLISH V1.0 REV: 1.1 TOTAL PAGES: 5 DATE: 26-Nov-2018 APPROVE BY: GIL S. TALANGAN Tolerence: -1/+1 mm 9/21/18 11:22 AM 02_Beams_Bridge_MANUAL.
How to set up your Ring Beams Bridge Choose a good location. Download the Ring app. Once you’ve decided on a good spot, plug the provided power supply into an outlet, and connect it to your Bridge with the included USB cable. The app walks you through setting up and managing your Bridge. Search for “Ring” in one of the app stores below, or visit: ring.com/app For the best wireless range, place your Bridge near the front of your home, ideally near a window.
Set up your Bridge in the Ring app. In the app, tap Set Up a Device. When prompted, select Beams and follow the in-app instructions. Doorbells Security Cams Set up your Ring Beams lights. Since you have a Ring Beams Bridge, you may have one or more Ring Beams lights. Now that your Bridge is set up, it’s time to set up your lights. To get started, tap Set Up a Device, select Beams, and follow the instructions in the app or the included manuals. Chimes Beams Alarm 02_Beams_Bridge_MANUAL.
Need a little help with setup? If your in-app setup doesn’t go as planned, try these tips: Get your Wi-Fi password just right. The most common setup issues come from entering the wrong Wi-Fi password. These passwords are case-sensitive, and every little error counts. 02_Beams_Bridge_MANUAL.indd 6-7 Reboot your router. If you entered the right password but you’re having no luck, try turning your Wi-FI router off, wait 30 seconds, then turn it back on. Then, begin setup again in the Ring app.
For additional help, visit: ring.com/help Or give us a call… US 1 800 656 1918 Canada 1 855 300 7289 Worldwide +1 310 929 7085 For a list of all our customer support numbers, visit: ring.com/callus To review your warranty coverage, please visit www.ring.com/warranty. Patents: www.ring.com/patents © 2018 Ring LLC or its affiliates. RING, ALWAYS HOME, and all related logos are trademarks of Ring LLC or its affiliates. Last updated: 09/21/18 02_Beams_Bridge_MANUAL.
FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. IC: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
