Floodlight Battery Smart Lighting 02_Battery_Floodlight_MANUAL.
1. Set up your Floodlight. Set up your Ring Bridge. The Bridge connects your Ring Smart Lights to the Ring app and other compatible Ring devices. Download the Ring app. The app walks you through setting up and managing your Ring Floodlight Battery. Search for “Ring” in one of these app stores, or visit: ring.com/app 2 02_Battery_Floodlight_MANUAL.indd 3 Download from Download from Windows Store StoreBridge, follow To setWindows up your the instructions in the Ring app or the Bridge user manual.
Remove the back cover. Remove the battery lid. Twist your Floodlight counter-clockwise to unlock and separate it from the back cover. Press the side buttons on the battery lid to remove it and open the battery compartment. 4 02_Battery_Floodlight_MANUAL.
Insert the batteries. Set up your Floodlight Battery in the Ring app. Insert four D Cell batteries (not included), matching the flat ends with the springs. In the app, tap Set Up a Device. Then place the lid onto the compartment and push down to snap it into place. Doorbells When prompted, select Smart Lights and follow the in-app instructions. After setup, replace the back cover (be sure to line up the arrows). Security Cams Chimes Smart Lights Alarm 6 02_Battery_Floodlight_MANUAL.
2. Install your Floodlight. Remove the mounting plate. Press the tab on the side and slide the mounting plate off of the back cover. 8 02_Battery_Floodlight_MANUAL.indd 9 Mark pilot holes. If installing on a masonry surface, use the mounting plate as a template to mark pilot holes, making sure the “UP” arrow is pointing upwards. Then drill the holes and insert the anchors.
Drive the screws. Hold the mounting plate firmly against the surface and drive the three mounting screws. Mount your Floodlight. Align your Floodlight with the mounting plate and slide it to the left to lock it in. The motion sensor is adjustable. Try various angles to find the best setting for your home. 10 02_Battery_Floodlight_MANUAL.
For additional help, visit: ring.com/help Or give us a call… US 1 800 656 1918 Canada 1 855 300 7289 Worldwide +1 310 929 7085 For a list of all our customer support numbers, visit: ring.com/callus To review your warranty coverage, please visit www.ring.com/warranty. Patents: www.ring.com/patents © 2019 Ring LLC or its affiliates. Ring, Alexa, Always Home, and all related logos are trademarks of Amazon.com, Inc. or its affiliates. Last updated: 01/08/19 02_Battery_Floodlight_MANUAL.
70mm 1523 26th St. Santa Monica, CA 90404 Models: Ring Motion Sensor (5SM1S8), Ring Spotlight (5B11S8), Ring Steplight (5LD1S8), Ring Pathlight (5LP1Y8), Ring Floodlight Battery (5B21S8), Ring Floodlight Wired (5W21S8), Ring Transformer (5AT1S9) Canada CAN ICES-3 (B)/NMB-3(B) Innovation, Science and Economic Development Canada (ISED) Compliance. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s).
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
