User's Manual

TRANSPOSE

The Transpose function can shift the pitch of the keyboard up or down in semi-tone

intervals up to a maximum of 24 semi-tones. Transpose does not affect the percussion.

The transpose value range can be adjusted -12, one octave lower to 12, one octave

higher. Press +YES and-NO buttons at the same time to restore the default value:0.

(Fig.1)

Fige.1

Fige.2

Fige.3

Fige.4

Fige.5

MASTER TUNE

The pitch of this piano is very accurate and stable; it is automatically set to standard

A440 pitch when the piano is turned on. If necessary, you can alter the piano pitch, the

tuning feature makes it possible to tune the pitch of the instrument in fine intervals to

match other instruments. You can adjust the master tune value from: -64 to 63.

Press +YES and-NO buttons at the same time to restore the default value:0.

(Fig.2)

TOUCH CURVE

The touch function provides four types of keyboard sensitivity to match different playing

styles: Touch Soft, Touch Normal, Touch Hard, Fixed?, the default is Normal.(Fig.3)

1.Touch Soft, the most sensitive keyboard response which permits maximum sound

levels with a light touch.

2.Touch Normal, an intermediate response suitable for most styles of music. Normal

is the default setting.

3.Touch Hard, a less sensitive keyboard response which requires a heavier touch to

obtain maximum sound levels.

4.Fixed?, the keyboard will transmit at a constant velocity and the sound will be the

same volume. You can press the OK button than use the +YES/-NO buttons to adjust

the value from:0-127, press +YES and-NO buttons at the same time to restore the

default value:100.

MAIN OCTAVE

The Octave function makes it possible to shift all the keys on the piano one or two

octaves up or down. With this Function menu you can shift the Main voice from: -2 to +2

octaves, press +YES and-NO buttons at the same time to restore the default value:0.

(Fig.4)

SPLIT OCTAVE

With this Function menu you can shift the Split voice from: -2 to +2 octaves, press

+YES and-NO buttons at the same time to restore the default value:0.(Fig.5)

FUNCTION / PERFORMANCE