User's Manual

Selecting Kit Edit
In kit mode press the [ENTER] button, the LCD will display “ ” (Instrument), now,
you can use the [+/-] buttons to select “VOL”(Pad Volume), “RVRB”(Reverb Level),
“CHRS”(Chrous Level),“PAN”(Pan),“PICH”(Pitch),“DCAY”(Decay),“COPY”
(Copy), and “RSET”(Reset).
INST
A.
In kit model press the [ENTER] button
ENTER
b
Selecting an Instrument (INST)
: the LCD will display “INST”
Press [ ] button again.
2 There are two ways to choose a drum at this point:
a. Through the following button to select the desired pad.
. Hit the drum that you want to set.
1.
.
For example: to select snare voice
ENTER “ ”
ENTER
“ ”
1. Press [ ] button,
2. Press [ ] button again, use the [SNARE] button or hit the snare pad forcefully to
select the voice, the LCD will display 2001
3.
Press the corresponding button of the drums to audition.
4.
the LCD will display INST .
Use the [-/+] buttons to select new snare voice.
Press [ENTER] button to confirm or press [BACK] button to return.
13
Begin Playing the Drums
Mode
Parameter/Value
K i t S e l e c t
K i t E d i t
S e tu p
C l i c k
S o ngTe m p o
ENTER
CRASH
TOM1
TOM2
RIDE
RIM
HI-HAT
HI-HAT
CONTROL
SNARE
KICK
TOM3